ASTM F1554

ASTM F1554

Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

: In stock

: ASTM

:

:

Publication Date
Format
$45.00

Publication Date: 09/01/2015 - Complete Document Changes Incorporated

Description :

This specification covers straight, bent, headed, and headless anchor bolts (also known as anchor rods) made of carbon, medium carbon boron, alloy, or high-strength lowalloy steel. It provides for anchor bolts in three strength grades, two thread classes, and in the diameters specified in Section 4. The specification also covers all-thread rod for use in anchoring to concrete. References to anchor bolts in this standard do not necessarily exclude all-thread rod.

Anchor bolts are intended for anchoring structural supports to concrete foundations. Such structural supports include building columns, column supports for highway signs, street lighting and traffic signals, steel bearing plates, and similar applications.

Supplementary requirements are included to provide for Grade 55 weldable steel, permanent manufacturers and grade identification, and impact properties for Grades 55 and 105.

Zinc coating requirements are in Section 7.

Suitable nuts and washers are listed in 6.7. Washers are detailed in 6.8.

This specification does not cover mechanical expansion anchors, powder-activated nails or studs, or anchor bolts fabricated from deformed bar.

The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

*A Summary of Changes section appears at the end of this standard

Document Type : Complete Document

Language : English

Page Count : 9

Publication Date : 09/01/2015

Revision : 15

Status : Current

Supplement : W/

Title : Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

Publication Date: 09/01/2015 - Complete Document

Description :

This specification covers straight, bent, headed, and headless anchor bolts (also known as anchor rods) made of carbon, medium carbon boron, alloy, or high-strength lowalloy steel. It provides for anchor bolts in three strength grades, two thread classes, and in the diameters specified in Section 4. The specification also covers all-thread rod for use in anchoring to concrete. References to anchor bolts in this standard do not necessarily exclude all-thread rod.

Anchor bolts are intended for anchoring structural supports to concrete foundations. Such structural supports include building columns, column supports for highway signs, street lighting and traffic signals, steel bearing plates, and similar applications.

Supplementary requirements are included to provide for Grade 55 weldable steel, permanent manufacturers and grade identification, and impact properties for Grades 55 and 105.

Zinc coating requirements are in Section 7.

Suitable nuts and washers are listed in 6.7. Washers are detailed in 6.8.

This specification does not cover mechanical expansion anchors, powder-activated nails or studs, or anchor bolts fabricated from deformed bar.

The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Document Type : Complete Document

Language : English

Page Count : 9

Publication Date : 09/01/2015

Revision : 15

Status : Historical

Title : Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

Publication Date: 12/01/2007 - Complete Document Changes Incorporated

Description :

This specification covers straight and bent, headed and headless, carbon, carbon boron, alloy, or high-strength lowalloy steel anchor bolts (also known as anchor rods). The anchor bolts are furnished in three strength grades, two thread classes, and in the sizes specified in Section 4.

The anchor bolts are intended for anchoring structural supports to concrete foundations. Such structural supports include building columns, column supports for highway signs, street lighting and traffic signals, steel bearing plates, and similar applications.

Supplementary requirements are included to provide for Grade 55 weldable steel, permanent manufacturers and grade identification, and impact properties for Grades 55 and 105.

Zinc coating requirements are included in Section 7 for applications requiring corrosion protection.

The recommended grade and style of nut and washer are included in 6.6 and 6.7 for each grade.

This specification does not cover the requirements for mechanical expansion anchors, powder-activated nails or studs, or anchor bolts fabricated from deformed bar.

The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Document Type : Complete Document

Language : English

Page Count : 10

Publication Date : 12/01/2007

Revision : 07A

Status : Historical

Supplement : W/

Title : Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

Publication Date: 12/01/2007 - Complete Document

Description :

This specification covers straight and bent, headed and headless, carbon, carbon boron, alloy, or high-strength low-alloy steel anchor bolts (also known as anchor rods). The anchor bolts are furnished in three strength grades, two thread classes, and in the sizes specified in Section 4.

The anchor bolts are intended for anchoring structural supports to concrete foundations. Such structural supports include building columns, column supports for highway signs, street lighting and traffic signals, steel bearing plates, and similar applications.

Supplementary requirements are included to provide for Grade 55 weldable steel, permanent manufacturers and grade identification, and impact properties for Grades 55 and 105.

Zinc coating requirements are included in Section 7 for applications requiring corrosion protection.

The recommended grade and style of nut and washer are included in 6.6 and 6.7 for each grade.

This specification does not cover the requirements for mechanical expansion anchors, powder-activated nails or studs, or anchor bolts fabricated from deformed bar.

The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

*A Summary of Changes section appears at the end of this standard.

Document Type : Complete Document

Language : English

Page Count : 9

Publication Date : 12/01/2007

Revision : 07A

Status : Historical

Title : Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

Publication Date: 08/01/2007 - Complete Document

Description :

This specification covers straight and bent, headed and headless, carbon, carbon boron, alloy, or high-strength low-alloy steel anchor bolts (also known as anchor rods). The anchor bolts are furnished in three strength grades, two thread classes, and in the sizes specified in Section 4.

The anchor bolts are intended for anchoring structural supports to concrete foundations. Such structural supports include building columns, column supports for highway signs, street lighting and traffic signals, steel bearing plates, and similar applications.

Supplementary requirements are included to provide for Grade 55 weldable steel, permanent manufacturers and grade identification, and impact properties for Grades 55 and 105.

Zinc coating requirements are included in Section 7 for applications requiring corrosion protection.

The recommended grade and style of nut and washer are included in 6.6 and 6.7 for each grade.

This specification does not cover the requirements for mechanical expansion anchors, powder-activated nails or studs, or anchor bolts fabricated from deformed bar.

The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

*A Summary of Changes section appears at the end of this standard.

Document Type : Complete Document

Language : English

Page Count : 9

Publication Date : 08/01/2007

Revision : 07

Status : Historical

Title : Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

Publication Date: 08/01/2004 - Complete Document Changes Incorporated

Description :

This specification covers straight and bent, headed and headless, carbon, carbon boron, alloy, or high-strength low-alloy steel anchor bolts (also known as anchor rods). The anchor bolts are furnished in three strength grades, two thread classes, and in the sizes specified in Section 4.

The anchor bolts are intended for anchoring structural supports to concrete foundations. Such structural supports include building columns, column supports for highway signs, street lighting and traffic signals, steel bearing plates, and similar applications.

Supplementary requirements are included to provide for Grade 55 weldable steel, permanent manufacturers and grade identification, and impact properties for Grades 55 and 105.

Zinc coating requirements are included in Section 7 for applications requiring corrosion protection.

The recommended grade and style of nut and washer are included in 6.6 and 6.7 for each grade.

This specification does not cover the requirements for mechanical expansion anchors, powder-activated nails or studs, or anchor bolts fabricated from deformed bar.

The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

*A Summary of Changes section appears at the end of this standard.

Document Type : Complete Document

Language : English

Page Count : 9

Publication Date : 08/01/2004

Revision : 04

Status : Historical

Supplement : W/

Title : Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

Publication Date: 08/01/2004 - Complete Document

Description :

(Footnote *)

This specification covers straight and bent, headed and headless, carbon, carbon boron, alloy, or high-strength low-alloy steel anchor bolts (also known as anchor rods). The anchor bolts are furnished in three strength grades, two thread classes, and in the sizes specified in Section 4.

The anchor bolts are intended for anchoring structural supports to concrete foundations. Such structural supports include building columns, column supports for highway signs, street lighting and traffic signals, steel bearing plates, and similar applications.

Supplementary requirements are included to provide for Grade 55 weldable steel, permanent manufacturers and grade identification, and impact properties for Grades 55 and 105.

Zinc coating requirements are included in Section 7 for applications requiring corrosion protection.

The recommended grade and style of nut and washer are included in 6.6 and 6.7 for each grade.

This specification does not cover the requirements for mechanical expansion anchors, powder-activated nails or studs, or anchor bolts fabricated from deformed bar.

The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Footnote * - A Summary of Changes section appears at the end of this standard.

Document Type : Complete Document

Language : English

Page Count : 9

Publication Date : 08/01/2004

Revision : 04

Status : Historical

Title : Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

Publication Date: 05/10/1999 - Complete Document

Description :

1. Scope

1.1 This specification covers straight and bent, headed and headless, carbon, carbon boron, alloy, or high-strength low-alloy steel anchor bolts (also known as anchor rods). The anchor bolts are furnished in three strength grades, two thread classes, and in the sizes specified in Section 4.

1.2 The anchor bolts are intended for anchoring structural supports to concrete foundations. Such structural supports include building columns, column supports for highway signs, street lighting and traffic signals, steel bearing plates, and similar applications.

1.3 Supplementary requirements are included to provide for Grade 55 weldable steel, permanent manufacturers and grade identification, and impact properties for Grades 55 and 105.

1.4 Zinc coating requirements are included in Section 7 for applications requiring corrosion protection.

1.5 The recommended grade and style of nut and washer are included in 6.6 and 6.7 for each grade.

1.6 This specification does not cover the requirements for mechanical expansion anchors, powder-activated nails or studs, or anchor bolts fabricated from deformed bar.

1.7 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Document Type : Complete Document

Language : English

Page Count : 9

Publication Date : 05/10/1999

Revision : 99

Status : Historical

Title : Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

Publication Date: 12/10/1997 - Complete Document

Document Type : Complete Document

Language : English

Page Count : 9

Publication Date : 12/10/1997

Revision : 97

Status : Historical

Title : Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

Publication Date: 01/01/1994 - Complete Document

Document Type : Complete Document

Language : English

Page Count : 8

Publication Date : 01/01/1994

Revision : 94

Status : Historical

Title : Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength