ASTM A488/A488M

ASTM A488/A488M

Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL
STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL (E1-1994)
STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL
STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL
STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL
STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL
STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL
STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL
STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL
STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL
STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL
STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL
STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL
STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL
STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL
STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL

: In stock

: ASTM

:

:

Format
$51.00

Publication Date: 03/01/2016 - Complete Document

Description :

This practice covers the qualification of procedures,welders, and operators for the fabrication and repair of steel castings by electric arc welding. 

Qualifications of a procedure and either or both the operator or welder under Section IX of the ASME Boiler and Pressure Vessel Code shall automatically qualify the procedure and either or both the operator or welder under this practice.P-number designations in the ASME grouping of base metals for qualification may be different than the category numbers listed in Table 1. Refer to Appendix X1 for a comparison of ASTM category numbers with the corresponding ASME P-Number designations.

Each manufacturer or contractor is responsible for the welding done by his organization and shall conduct the tests required to qualify his welding procedures, welders, and operators.

Each manufacturer or contractor shall maintain a record of welding procedure qualification tests (Fig. 1), welder or operator performance qualification tests (Fig. 2), and welding procedure specification (Fig. 3), which shall be made available to the purchaser’s representative on request.

The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

SI Units—Within the text, the SI units are shown in brackets.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

*A Summary of Changes section appears at the end of this standard

Document Type : Complete Document

Language : English

Page Count : 19

Publication Date : 03/01/2016

Revision : 16

Status : Current

Title : Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel

Publication Date: 11/01/2012 - Complete Document

Description :

This practice covers the qualification of procedures, welders, and operators for the fabrication and repair of steel castings by electric arc welding.

Qualifications of a procedure and either or both the operator or welder under Section IX of the ASME Boiler and Pressure Vessel Code shall automatically qualify the procedure and either or both the operator or welder under this practice. P-number designations in the ASME grouping of base metals for qualification may be different than the category numbers listed in Table 1. Refer to Appendix X1 for a comparison of ASTM category numbers with the corresponding ASME P-Number designations.

Each manufacturer or contractor is responsible for the welding done by his organization and shall conduct the tests required to qualify his welding procedures, welders, and operators.

Each manufacturer or contractor shall maintain a record of welding procedure qualification tests (Fig. 1), welder or operator performance qualification tests (Fig. 2), and welding procedure specification (Fig. 3), which shall be made available to the purchaser's representative on request.

The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

SI Units-Within the text, the SI units are shown in brackets.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

*A Summary of Changes section appears at the end of this standard

Document Type : Complete Document

Language : English

Page Count : 21

Publication Date : 11/01/2012

Revision : 12

Status : Historical

Title : Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel

Publication Date: 04/01/2010 - Complete Document

Description :

This practice covers the qualification of procedures, welders, and operators for the fabrication and repair of steel castings by electric arc welding.

Qualifications of a procedure and either or both the operator or welder under Section IX of the ASME Boiler and Pressure Vessel Code shall automatically qualify the procedure and either or both the operator or welder under this practice. P-number designations in the ASME grouping of base metals for qualification may be different than the category numbers listed in Table 1. Refer to Appendix X1 for a comparison of ASTM category numbers with the corresponding ASME P-Number designations.

Each manufacturer or contractor is responsible for the welding done by his organization and shall conduct the tests required to qualify his welding procedures, welders, and operators.

Each manufacturer or contractor shall maintain a record of welding procedure qualification tests (Fig. 1), welder or operator performance qualification tests (Fig. 2), and welding procedure specification (Fig. 3), which shall be made available to the purchaser's representative on request.

The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

SI Units—Within the text, the SI units are shown in brackets.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

*A Summary of Changes section appears at the end of this standard.

Document Type : Complete Document

Language : English

Page Count : 18

Publication Date : 04/01/2010

Revision : 10

Status : Historical

Title : Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel

Publication Date: 11/01/2009 - Complete Document

Description :

This practice covers the qualification of procedures, welders, and operators for the fabrication and repair of steel castings by electric arc welding.

Qualifications of a procedure and either or both the operator or welder under Section IX of the ASME Boiler and Pressure Vessel Code shall automatically qualify the procedure and either or both the operator or welder under this practice. P-number designations in the ASME grouping of base metals for qualification may be different than the category numbers listed in Table 1. Refer to Appendix X1 for a comparison of ASTM category numbers with the corresponding ASME P-Number designations.

Each manufacturer or contractor is responsible for the welding done by his organization and shall conduct the tests required to qualify his welding procedures, welders, and operators.

Each manufacturer or contractor shall maintain a record of welding procedure qualification tests (Fig. 1), welder or operator performance qualification tests (Fig. 2), and welding procedure specification (Fig. 3), which shall be made available to the purchaser's representative on request.

The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

SI Units—Within the text, the SI units are shown in brackets.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

*A Summary of Changes section appears at the end of this standard.

Document Type : Complete Document

Language : English

Page Count : 18

Publication Date : 11/01/2009

Revision : 09

Status : Historical

Title : Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel

Publication Date: 05/01/2007 - Complete Document

Description :

This practice covers the qualification of procedures, welders, and operators for the fabrication and repair of steel castings by electric arc welding.

Qualifications of a procedure and either or both the operator or welder under Section IX of the ASME Boiler and Pressure Vessel Code shall automatically qualify the procedure and either or both the operator or welder under this practice. P-number designations in the ASME grouping of base metals for qualification may be different than the category numbers listed in Table 1. Refer to Appendix X1 for a comparison of ASTM category numbers with the corresponding ASME P-Number designations.

Each manufacturer or contractor is responsible for the welding done by his organization and shall conduct the tests required to qualify his welding procedures, welders, and operators.

Each manufacturer or contractor shall maintain a record of welding procedure qualification tests (Fig. 1), welder or operator performance qualification tests (Fig. 2), and welding procedure specification (Fig. 3), which shall be made available to the purchaser's representative on request.

The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with this practice.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

*A Summary of Changes section appears at the end of this standard.

Document Type : Complete Document

Language : English

Page Count : 18

Publication Date : 05/01/2007

Revision : 07

Status : Historical

Title : Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel

Publication Date: 09/01/2006 - Complete Document

Description :

This practice covers the qualification of procedures, welders, and operators for the fabrication and repair of steel castings by electric arc welding.

Qualifications of a procedure and either or both the operator or welder under Section IX of the ASME Boiler and Pressure Vessel Code shall automatically qualify the procedure and either or both the operator or welder under this practice. P-number designations in the ASME grouping of base metals for qualification may be different than the category numbers listed in Table 1. Refer to Appendix X1 for a comparison of ASTM category numbers with the corresponding ASME P-Number designations.

Each manufacturer or contractor is responsible for the welding done by his organization and shall conduct the tests required to qualify his welding procedures, welders, and operators.

Each manufacturer or contractor shall maintain a record of welding procedure qualification tests (Fig. 1), welder or operator performance qualification tests (Fig. 2), and welding procedure specification (Fig. 3), which shall be made available to the purchaser’s representative on request.

The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with this practice.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

*A Summary of Changes section appears at the end of this standard.

Document Type : Complete Document

Language : English

Page Count : 18

Publication Date : 09/01/2006

Revision : 06

Status : Historical

Title : Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel

Publication Date: 09/01/2004 - Complete Document

Description :

This practice covers the qualification of procedures, welders, and operators for the fabrication and repair of steel castings by electric arc welding.

Qualifications of a procedure and either or both the operator or welder under Section IX of the ASME Boiler and Pressure Vessel Code shall automatically qualify the procedure and either or both the operator or welder under this practice. P-number designations in the ASME grouping of base metals for qualification may be different than the category numbers listed in Table 1. Refer to Appendix X1 for a comparison of ASTM category numbers with the corresponding ASME P-Number designations.

Each manufacturer or contractor is responsible for the welding done by his organization and shall conduct the tests required to qualify his welding procedures, welders, and operators.

Each manufacturer or contractor shall maintain a record of welding procedure qualification tests (Fig. 1), welder or operator performance qualification tests (Fig. 2), and welding procedure specification (Fig. 3), which shall be made available to the purchaser's representative on request.

The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with this practice.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Document Type : Complete Document

Language : English

Page Count : 18

Publication Date : 09/01/2004

Revision : 04

Status : Historical

Title : Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel

Publication Date: 03/10/2001 - Complete Document Changes Incorporated

Description :

Scope

This practice establishes the qualification of procedures, welders, and operators for the fabrication and repair of steel castings by electric arc welding.

Qualifications of a procedure and either or both the operator or welder under Section IX of the ASME Boiler and Pressure Vessel Code shall automatically qualify the procedure and either or both the operator or welder under this practice. P-number designations in the ASME grouping of base metals for qualification may be different than the category numbers listed in Table 1. Refer to Appendix X1 for a comparison of ASTM category numbers with the corresponding ASME P-Number designations.

Each manufacturer or contractor is responsible for the welding done by his organization and shall conduct the tests required to qualify his welding procedures, welders, and operators.

Each manufacturer or contractor shall maintain a record of welding procedure qualification tests (Fig. 1), welder or operator performance qualification tests (Fig. 2), and welding procedure specification (Fig. 3), which shall be made available to the purchaser's representative on request.

The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with this practice.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Document Type : Complete Document

Language : English

Page Count : 18

Publication Date : 03/10/2001

Revision : 01

Status : Historical

Supplement : W/

Title : Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel

Publication Date: 06/10/1999 - Complete Document

Description :

1. Scope

1.1 This practice establishes the qualification of procedures, welders, and operators for the fabrication and repair of steel castings by electric arc welding.

1.1.1 Qualifications of a procedure and either or both the operator or welder under Section IX of the ASME Boiler and Pressure Vessel Code shall automatically qualify the procedure and either or both the operator or welder under this practice. P-number designations in the ASME grouping of base metals for qualification may be different than the category numbers listed in Table 1. Refer to Appendix X1 for a comparison of ASTM category numbers with the corresponding ASME P-Number designations.

1.2 Each manufacturer or contractor is responsible for the welding done by his organization and shall conduct the tests required to qualify his welding procedures, welders, and operators.

1.3 Each manufacturer or contractor shall maintain a record of welding procedure qualification tests (Fig. 1), welder or operator performance qualification tests (Fig. 2), and welding procedure specification (Fig. 3), which shall be made available to the purchaser's representative on request.

1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with this practice.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Document Type : Complete Document

Language : English

Page Count : 15

Publication Date : 06/10/1999

Revision : 99

Status : Historical

Title : Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel

Publication Date: 09/10/1995 - Complete Document

Document Type : Complete Document

Language : English

Page Count : 15

Publication Date : 09/10/1995

Revision : 95

Status : Historical

Title : Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel

Publication Date: 12/15/1994 - Complete Document

Document Type : Complete Document

Language : English

Page Count : 14

Publication Date : 12/15/1994

Revision : 94

Status : Historical

Title : STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL

Publication Date: 12/15/1992 - Complete Document Changes Incorporated

Document Type : Complete Document

Language : English

Page Count : 14

Publication Date : 12/15/1992

Revision : 92

Status : Historical

Supplement : W/

Title : STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL (E1-1994)

Publication Date: 12/15/1992 - Complete Document

Document Type : Complete Document

Page Count : 16

Publication Date : 12/15/1992

Revision : 92

Status : Historical

Title : STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL

Publication Date: 12/15/1991 - Complete Document

Document Type : Complete Document

Language : English

Page Count : 14

Publication Date : 12/15/1991

Revision : 91A

Status : Historical

Title : STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL

Publication Date: 08/15/1991 - Complete Document

Document Type : Complete Document

Language : English

Page Count : 14

Publication Date : 08/15/1991

Revision : 91

Status : Historical

Title : STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL

Publication Date: 12/28/1990 - Complete Document

Document Type : Complete Document

Language : English

Page Count : 13

Publication Date : 12/28/1990

Revision : 90

Status : Historical

Title : STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL

Publication Date: 08/25/1989 - Complete Document Changes Incorporated

Document Type : Complete Document

Language : English

Page Count : 13

Publication Date : 08/25/1989

Revision : 89

Status : Historical

Supplement : W/

Title : STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL

Publication Date: 08/25/1989 - Base Document

Document Type : Base Document

Page Count : 0

Publication Date : 08/25/1989

Revision : 89

Status : Historical

Title : STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL

Publication Date: 12/30/1988 - Complete Document

Document Type : Complete Document

Language : English

Page Count : 13

Publication Date : 12/30/1988

Revision : 88B

Status : Historical

Title : STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL

Publication Date: 07/29/1988 - Complete Document

Document Type : Complete Document

Language : English

Page Count : 13

Publication Date : 07/29/1988

Revision : 88A

Status : Historical

Title : STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL

Publication Date: 01/29/1988 - Complete Document

Document Type : Complete Document

Language : English

Page Count : 13

Publication Date : 01/29/1988

Revision : 88

Status : Historical

Title : STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL

Publication Date: 02/27/1987 - Complete Document

Document Type : Complete Document

Language : English

Page Count : 17

Publication Date : 02/27/1987

Revision : 87

Status : Historical

Title : STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL

Publication Date: 06/27/1986 - Complete Document

Document Type : Complete Document

Language : English

Page Count : 17

Publication Date : 06/27/1986

Revision : 86A

Status : Historical

Title : STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL

Publication Date: 05/15/1986 - Complete Document

Document Type : Complete Document

Language : English

Page Count : 17

Publication Date : 05/15/1986

Revision : 86

Status : Historical

Title : STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL

Publication Date: 12/27/1985 - Complete Document

Document Type : Complete Document

Language : English

Page Count : 17

Publication Date : 12/27/1985

Revision : 85A

Status : Historical

Title : STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL

Publication Date: 01/01/1985 - Complete Document

Document Type : Complete Document

Page Count : 0

Publication Date : 01/01/1985

Revision : 85

Status : Historical

Title : STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL

See More titles in ASTM

See More titles in ASTM A

See More titles in ASTM A-R